Communicator Mall Display Stand

The Communicator mall display stand is beautifully designed to display advertising posters or literature.
The unit can be fitted with a combination of double-sided EASY LOADER snap frame, SlimLock key lockable frames or notice boards, edge-lit light boxes, brochure holders, product display shelves and Pro-Motion LCD advertising players.
The frames normally fitted, take a poster measuring 700mm x 1000mm in portrait fashion but can be made to any size if quantities are sufficient.

Base:
The base is made from 25mm pre-finished board, normally in a “beach wood” grain but can be any colour if quantity is sufficient.
The base is fitted with 4 normal castors and 2 off lockable castors so that it can be moved anywhere in the mall with ease.
A 5mm thick powder coated steel plate can be screwed to the under side of the base for added stability.

Filler Panel:
The filler panel is made from 25mm pre-finished board same as the base.
The size of the filler panel is varied if the unit needs to be taller or shorter for a given poster frame size.
The filler panel can be fitted with a smaller snap frame, acrylic poster holders, acrylic brochure holders, product holders or other items as required.
The filler panel can be left out if not required.

Uprights:
The uprights are 60mm x 60mm natural anodised or powder coated aluminium poles with 4 screw flutes per pole.
The screw flutes are used for mounting the pole onto the base with screws passing through from the bottom of the base up into the pole.
The pole has 4 grooves (flutes) used for mounting snap poster frames, brochure holders or any other item you wish to attach to the pole or stand.
The ends are capped with a rounded plastic chromed cap or a flat end cap.

Customisation:
The unit can be fully customised to suite your specific requirements to ensure your display is as effective and informative as possible.